¶ Available versions
- 4.8mm - 3/16" - made for [4.8mm - 3/16"] width copper foil and [3mm - 5/16"] thick glass
- 5.6mm - 7/32" - made for [5.6mm - 7/32"] width copper foil and [3mm - 5/16"] thick glass
- 6.4mm - 1/4" - made for [6.4mm - 1/4"] width copper foil and [3mm - 5/16"] thick glass
.jpg)
¶ Instruction video
¶ Instruction manual
This manual is a work in progress!
¶ Step 1 - Insert the copper foil
Lay the hand foiler upside down and insert the copper foil with the adhesive strip facing upwards. The copper side should face down.
¶ Step 2 - Pull the copper foil through
Rotate the hand foiler and pull the copper foil through, make sure you have about a fingers length of copper foil to work with for the next step.
¶ Step 3 - Peel the adhesive strip
Peel the adhesive strip for about a fingers length and cut it off.
¶ Step 4 - Carefully pull the copper foil back
Carefully pull (not all the way!) the copper foil back while making sure you can still pull it back
through. Peel and bend the end of the adhesive strip towards the bottom of the hand foiler.
¶ Step 5 - Pull the copper foil all the way through
Pull the copper foil back through and feed it through the roller.
¶ Step 6 - Glass foiling steps coming soon!
Visit the instruction video for now